All height safety systems require regular inspection and certification under both Australian Standards and WHS Regulations. AS/NZS 1891.4 sets the inspection criteria, while the WHS Act places a duty on PCBUs to maintain fall protection systems in safe working order. Our inspectors assess anchor points, static lines, guardrails, walkways, ladders and all associated hardware against current compliance requirements.
Get a free quote for height safety inspection and certification services.
Get a Free QuoteCall 0404 546 402AS/NZS 1891.4 requires height safety equipment to be inspected by a competent person at intervals not exceeding 12 months, or after any event that may have affected the system such as a fall arrest event, severe weather or structural modification to the building.
If any component fails inspection, we tag it as non compliant and provide a detailed report identifying the issue and recommended remediation. Non compliant systems must not be used until remediated.
Yes. Our inspectors are qualified to assess and certify any height safety system regardless of the original installer.
Design, supply and installation of roof anchor point systems for fall arrest and restraint across commercial, industrial and residential buildings.
Horizontal lifeline systems for continuous fall protection across rooftops, allowing workers to traverse without disconnecting.